The use of flexible stone can transform mundane walls into eye catching works of art in any room in the house. Its innovative nature is due to its light weight that is easy to handle as well as it simulating the look of natural granite. In this guide, we will talk about the correct way to install flexible stone, what materials are needed and how to give the installation an expert touch.
An Overview on Flexible Stone
Flexible stone is made by first cutting real stone into thin slices or veneers. Unlike traditional stone, which is usually bulky, flexible stone’s light weight makes transport and installation much easier. Because it enhances the aesthetics of both the interior and exterior walls of buildings, this product is ideal for use on both residential and commercial structures.
Tools and Materials Required
It is important to note that all tools and materials should be listed and gathered before starting the installation. The following tools and materials will be required:
- Vertical and horizontal stone adhesives and flexible stone sheets,
- Utility scissors or knives,
- Safety goggles and gloves,
- A trowel,
- Measuring tape, and
- A level.
With all materials prepared, you can follow the steps of the installation without hassle.
How to Prepare the Surface
Before for the installation of flexible stone, all surfaces must be prepared properly such as making sure that the walls are damaged, clean, and free of moisture. In instance where the walls seem uneven, using a leveling compound would be recommended. The stone would also be simple to adhere to the wall which would impact the overall appeal the wall brings.
Measuring and Cutting the Stone
One of the other pieces of surface preparation that must be thought of to achieve the best results is measuring the area of installation along with the stone. All measurements done need to be marked so the area the stone will go needs to be marked too. The sheets of stone will also need adequate trimming done and specialized scissors as well as utility knives can be used. In achieving the best results, all cuts done must be straight which would allow a perfect fit alongside the wall. Following these pieces of advice will ensure perfectly achieving the sheets fitted to the wall.
Applying the Stone and Its Adhesive
Once the stone has been cut, the next step is to apply adhesive. With the use of a trowel, spread a thin layer of adhesive over the wall in increments. This will enable you to fix the stone before the adhesive sets. From the bottom up, each sheet of flexible stone should be placed on the adhesive and pressed firmly. Make sure that you use a level to keep every piece straight, and adjust the stone as needed. Keep going until the entire area is covered.
Finishing touches
After doing so and installing the flexible stone sheets, the adhesive ought to be left to set as per the instructions that come with the adhesive. After the set time, inspect the seams that exist between the sheets to see if they need grouting or caulking to cover gaps for a cleaner look. Once everything is in place, take the excess adhesives and dust on the surface of the stone to showcase the magnificent new stone wall.
Conclusion
The installation of Flexible Stone will provide visual appeal to your space while ensuring durability, fashion, and modern architecture. With proper preparation, one can achieve a seamless installation, either for the interiors or exteriors of a building using stone. As home decor trends shift to more natural materials, Flexible Stone provides ease of access application to aesthetics and functionality.
Industry Trends
The use of natural materials in design looks to be growing with Flexible Stone gaining more attention and application in both residential and commercial projects. As them and designers, the supply is likely to widen to accommodate materials, tools, and supplies, signaling a shifting attitude toward more sustainable eco-friendly means.
